The Vigil SiteSafe™ NT system is designed for object detection with system alerts providing operators with time to respond to hazards and avoidcollisions leading to potential accidents. The system is based upon frequency modulated continuous wave (FMCW) radar that detects stationaryand moving objects.The system can help operators of construction and mining equipment, and for that matter any heavy equipment to minimize the risk ofincidents therefore translating into overall cost reductions and improvements in operational efficiency. Diminished visibility plays a key role inmany such accidents and the size and power of such vehicles leave little room for error. Blind spots can be significantly large on the sides andrear of such vehicles and combined with dust and debris raised during excavation can have a detrimental effect on visibility.To help overcome these problems, the Vigil SiteSafe™ NT system is typically installed at the rear of heavy vehicles and dump trucks helping theoperators work more safely. Where needed enhanced systems using a pair of radar sensors can also be deployed.The sensors emit fan shaped beams of high frequency microwaves and to minimize false alarms the sensors are configured to create a sensingarea corresponding to the blind spot therefore ignoring objects outside that area. Alternatively, objects entering the sensing area alter the timedelay of the return signal therefore prompting the system to signal visible and audible alerts to the operator through the indicator consoleinstalled in the cabin close to the operator. Additionally, an onboard camera and LCD monitor system allows the operator to visually check forobstructions instantaneously.
Vigil SiteSafe
TM
NT - Non-Tag Proximity Warning System
Key Specifications & Features
Proximity Sensor (Model: VNT-511)Operating Voltage: 12 to 30 V DCOperating Temperature: -40 to +65°CIngress Protection Rating: Rugged IP67 ABS EnclosureRange: Adjustable for 1 to 24 metersConnector: Euro Type 5-Pin Integral
In-cabin Alarm and LED Indicator Unit (Model: VNT-521)Operating Voltage: 12 to 30 V DCOperating Temperature: -20 to +65°CAudio Level: >90 dBIngress Protection Rating: Rugged IP50 ABS EnclosureVisible Indicator: Red / Green / BothConnector: Euro Type 5-Pin Integral
Front and Rear View Closed Circuit Camera System - FRVCCCS(Model: VNT-541) Power Input: 12/32 V DC Screen: 7" digital LCD display - 16:9 wide Video: 4 channel x 4 way Accessories: Sun visor and steel mounting bracket Protection: IP 67 rated with -10 ⁰C to +65 ⁰C operating temperature range
Front and Rear Cameras (Model: VNT-551) Power Input: 12 V DC Viewing Angle: 170 ⁰ with Sony/Sharp CCD Protection: IP 69K rated with -20 ⁰C to +70 ⁰C operating temperature range Night Vision: 12 IR LED for 0 Lux/Night View Operation with 12 meters view distance
The Vigil SiteSafe™ NT system is designed for object detectionwith system alerts providing operators with time to respond tohazards and avoid collisions leading to potential accidents. Thesystem is based upon frequency modulated continuous wave(FMCW) radar that detects stationary and moving objects.The system can help operators of construction and miningequipment, and for that matter any heavy equipment tominimize the risk of incidents therefore translating into overallcost reductions and improvements in operational efficiency.Diminished visibility plays a key role in many such accidents andthe size and power of such vehicles leave little room for error.Blind spots can be significantly large on the sides and rear ofsuch vehicles and combined with dust and debris raised duringexcavation can have a detrimental effect on visibility.To help overcome these problems, the Vigil SiteSafe™ NT systemis typically installed at the rear of heavy vehicles and dumptrucks helping the operators work more safely. Where neededenhanced systems using a pair of radar sensors can also bedeployed.The sensors emit fan shaped beams of high frequencymicrowaves and to minimize false alarms the sensors areconfigured to create a sensing area corresponding to the blindspot therefore ignoring objects outside that area. Alternatively,objects entering the sensing area alter the time delay of thereturn signal therefore prompting the system to signal visibleand audible alerts to the operator through the indicator consoleinstalled in the cabin close to the operator. Additionally, anonboard camera and LCD monitor system allows the operator tovisually check for obstructions instantaneously.
Key Specifications & Features
Proximity Sensor (Model: VNT-511)Operating Voltage: 12 to 30 V DCOperating Temperature: -40 to +65°CIngress Protection Rating: Rugged IP67 ABS EnclosureRange: Adjustable for 1 to 24 metersConnector: Euro Type 5-Pin Integral
In-cabin Alarm and LED Indicator Unit (Model: VNT-521)Operating Voltage: 12 to 30 V DCOperating Temperature: -20 to +65°CAudio Level: >90 dBIngress Protection Rating: Rugged IP50 ABS EnclosureVisible Indicator: Red / Green / BothConnector: Euro Type 5-Pin Integral
Front and Rear View Closed Circuit Camera System - FRVCCCS(Model: VNT-541) Power Input: 12/32 V DC Screen: 7" digital LCD display - 16:9 wide Video: 4 channel x 4 way Accessories: Sun visor and steel mounting bracket Protection: IP 67 rated with -10 ⁰C to +65 ⁰C operating temperature range
Front and Rear Cameras (Model: VNT-551) Power Input: 12 V DC Viewing Angle: 170 ⁰ with Sony/Sharp CCD Protection: IP 69K rated with -20 ⁰C to +70 ⁰C operating temperature range Night Vision: 12 IR LED for 0 Lux/Night View Operation with 12 meters view distance